刘 辉,蔡 萍.基于模糊控制的高精度时钟同步系统[J].测控技术,2020,39(9):113-117 |
基于模糊控制的高精度时钟同步系统 |
High-Accuracy Clock Synchronization System Based on Fuzzy Control |
|
DOI:10.19708/j.ckjs.2020.05.251 |
中文关键词: GPS FPGA VCO 时钟同步 模糊控制 |
英文关键词:GPS FPGA VCO time synchronization fuzzy control |
基金项目: |
|
摘要点击次数: 1226 |
全文下载次数: 240 |
中文摘要: |
电网输配线故障定位对电网故障排除及供电保障有至关重要的作用。位于输配电线路两端的行波故障定位设备的同步误差决定了故障定位的基本精度。沿用GPS作为时钟同步基准,以FPGA+VCO替代传统方法的MCU+固定频率晶振构建高精度时钟同步系统,提高了系统同步精度并消除了晶振老化、器件温漂等带来的长期稳定性问题;通过模糊控制提高了系统同步速度。构建的系统同步精度优于±25 ns,同步速度(系统从接收到同步源(GPS秒脉冲)至系统时钟调整锁相完成所需时间)少于90 s。 |
英文摘要: |
Power transmission line fault location equipment plays an important role in power grid troubleshooting and power supply guarantee.The synchronization error of the acquisition system between the traveling-wave fault location equipments determines the basic accuracy of fault location.GPS was used as the clock synchronization reference,and FPGA+VCO was used instead of the traditional method of MCU+fixed frequency crystal oscillator,to build a high-precision clock synchronization system,which improved synchronization accuracy and eliminated long-term stability issues caused by crystal aging and components temperature drift.The synchronization speed was improved by fuzzy control.The system synchronization accuracy is better than ±25 ns.And it takes less than 90 s from the synchronization source clock (GPS) received to the phase-locked by the system adjusted. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |